Electrical Authorizations Training BE Verification – BE Measurement
Train for BE Verification and BE Measurement electrical authorizations. This training is available at one of our centers or at your premises.
or contact us at
(4.9/5) on Google
300
TRAINEES TRAINED / MONTH
4.9 / 5
SATISFACTION RATE
98%
SUCCESS RATE
The BE Verification BE Measurement electrical authorization training is intended for professionals who are required to perform electrical or non-electrical measurements and safety verifications on electrical installations with a voltage below 1000 Volts in alternating current and 1500 Volts in direct current.
At the end of the training, participants will be able to perform verifications and measurements in compliance with the safety measures recommended by standard NFC 18-510, including: respecting approach distances and environmental zones, delimiting work zones, verifying and using PPE, performing measurements and verifications in the presence of live bare parts.
Objectives of BE Verification BE Measurement Training
- Safely perform electrical measurements (voltage, resistance, continuity, etc.) and non-electrical measurements (thermographic measurements, etc.) on Low Voltage electrical installations.
- Safely perform visual inspections based on diagrams and files, and check the condition of Low Voltage electrical installations, including conductors and their connections.
- Safely perform technical checks to ensure, in particular, the proper functioning of safety devices, such as differential protection devices like RCDs, emergency cut-off devices, and safety lighting.
- Enable the employer to issue a BE Verification BE Measurement electrical authorization certificate.
3 days
DURATION OF INITIAL TRAINING
1.5 days
DURATION OF REFRESHER TRAINING
Audience & Prerequisites
- Examples of concerned professionals: Regulatory inspection of installations, control body technician, Quality control agent / metrologist, diagnostician.
- The BE Measurement BE Verification electrical authorization training requires knowledge of electricity, including: electrical quantities, mastery of electrical equipment, and reading an electrical diagram.
How to Train?
- At our training centers (inter-company): we offer BE Verification BE Measurement electrical authorization training in Paris and Marseille.
- At your sites (intra-company): our network of 60 trainers allows us to intervene at your premises throughout France to train your teams
- In Blended-Learning: a training that combines E-Learning (for theory) and face-to-face (for practice) to minimize the demobilization of your employees.
Our Training Dates
All our training dates are 100% guaranteed. We do not cancel any session.
LIEU DE FORMATION | PROCHAINES DATES |
Centre de Formation Paris Île-de-France | 17/11/25 au 19/11/25 24/11/25 au 26/11/25 01/12/25 au 03/12/25 15/12/25 au 17/12/25 12/01/26 au 14/01/26 26/01/26 au 28/01/26 09/02/26 au 11/02/26 18/02/26 au 20/02/26 23/02/26 au 25/02/26 |
Centre de Formation Marseille Bouches-du-Rhône | 17/12/25 au 19/12/25 14/01/26 au 16/01/26 11/02/26 au 13/02/26 11/03/26 au 13/03/26 |
Formation dans vos locaux - France entière (intra-entreprise) | Nous contacter pour une proposition de dates |
Formation Blended Learning (formation théorique en E-learning + formation pratique en présentiel) | Nous contacter pour une proposition de dates |
Price of BE Measurement BE Verification Training
Voltwork is Qualiopi certified. Whether you are an employee, self-employed, or an individual, we can offer you financing solutions via your OPCO, your Training Insurance Fund, or France Travail.
FORMATIONS | DANS NOTRE CENTRE (tarif par personne) | DANS VOS LOCAUX* (tarif par groupe) |
Formation Initiale 3 jours | 500€ HT | 2000€ HT |
Formation Recyclage 2 jours | 350€ HT | 1200€ HT |
(*) You can include up to 12 trainees in an intra-company session.
Training Program
BE Verification BE Measurement Theoretical Training
- Regulations and principles of standard NF C18-510
- Risks of electric current (direct / indirect contact, arcing, short circuit)
- Its effects on the human body (electrocution, electric shock, burns, falls, etc.) and equipment (fires)
- General principles of prevention and protection and risk assessment
- Classification of installations
- Role of interveners, electrical works, operations, environmental zones, written documents
- Limits of BE Measurement BE Verification electrical authorization
- Electrical accidents: how to react?
- Theoretical evaluation: BE Measurement BE Verification knowledge validation questionnaire
BE Verification BE Measurement Practical Training
- Analyze risks upstream of measurement and verification operations.
- Organize and mark off the work area.
- Verification and use of Personal Protective Equipment
- Identify, verify, and use equipment and tools
- Draft necessary documents
- Perform measurements and verification with and without the presence of live bare parts
- Practical evaluation by the trainer: practical scenario adapted to the BE Verification BE Measurement electrical authorization level
Fill out the form or call us at 01.87.66.30.70
They train their teams with VoltWork
FAQ Electrical Authorizations BE Verification BE Measurement
What is the Validity Period of the BE Verification BE Measurement Electrical Authorization?
According to standard NF C18-510, it is advisable to attend a 1.5-day refresher training every three years to maintain your BE Test authorization.
I Am BE Test Authorized, is there any Benefit in Taking the BE Verification BE Measurement Training?
No. The BE Test electrical authorization covers these authorizations: you are already able to perform measurements and verifications.
Is it Possible to Take this Training 100% Remotely?
No. The practical training and evaluation for BE Verification BE Measurement training must be carried out in person with a trainer on electrical installations. The theoretical part can be done via E-Learning to shorten the overall duration of the in-person training.
Is the BE Verification BE Measurement Training Eligible for CPF Funding?
No, this has not been the case since December 31, 2021, when France Compétences deactivated it from the RS (Répertoire Spécifique). You can find more information here.
Do I Need an Electrical Diploma to Participate in this Training?
No, this training does not necessarily require a diploma. However, it does require a good basic understanding of electricity and mastery of the measurement tools and verification procedures used in your professional activity.
Can I Lock out an Electrical Installation with the BE Measurement BE Verification Authorization?
No. You can de-energize for your own use, but you cannot perform a lockout procedure that allows third parties to work on the installations. The BC authorization level is required in this case.
Train with VoltWork
Train with experts! VoltWork training organization specializes in electrical safety:
- A network of 60+ expert trainers, all former electricians with real field knowledge.
- 3000 learners trained / year in electrical authorizations
- Training in one of our centers, at your premises, in a blended e-learning / face-to-face format? We have the right training solution to meet your operational constraints!
- A dedicated Training team to support you administratively, pedagogically, and logistically before, during, and after training.
- We are Qualiopi certified: our training courses are covered by your Skills Operator
