Electrical Certification BS BE Manoeuvre
Get your BS BE Manoeuvre certification with VoltWork, the expert in electrical risk prevention training.
Training for non-electrician personnel
14 hours of initial level training
Available in-person or E-Learning
(4.9/5) on Google
300
TRAINEES TRAINED / MONTH
4.9 / 5
SATISFACTION RATE
98%
SUCCESS RATE
The BS BE Manoeuvre electrical certification training is intended for Elementary Intervention Managers: all non-electrician professionals who are required to perform “simple” electrical operations in Low Voltage.
At the end of the BS BE Manoeuvre training, trainees will master the safety requirements of standard NFC 18-510 to:
Objectives of the BS BE Manoeuvre Training
- Perform elementary connection, replacement, and resetting operations on Low Voltage installations in compliance with the prevention measures recommended by standard NFC 18-510.
- Enable the employer to issue a BS BE Manoeuvre electrical certification.
2 days
DURATION OF INITIAL TRAINING
1.5 days
DURATION OF REFRESHER TRAINING
Audience & Prerequisites
- Examples of relevant professionals: building caretaker, maintenance agent, plumber, painter, IT technician, carpenter, etc.
- The BS BE Manoeuvre electrical certification training does not require extensive knowledge of electricity. Participants must be able to understand safety instructions (proficiency in French required).
How to Train?
- In our training centers (inter-company): we welcome your teams to our centers for BS BE Manoeuvre electrical certification training in Paris and Marseille.
- At your sites (in-company): our network of 60 trainers allows us to intervene at your premises throughout France to train your teams in BS and/or BE Manoeuvre certifications.
- In Blended Learning format: a training that combines an E-Learning part and a 3.5-hour practical in-person training. A flexible format to avoid demobilizing your teams.
Our Training Dates
All our training dates are 100% guaranteed. We do not cancel any sessions.
LIEUX DE FORMATION | PROCHAINES DATES |
Centre de Formation Paris Île-de-France | 13/11/25 au 14/11/25 24/11/25 au 25/11/25 08/12/25 au 09/12/25 15/12/25 au 16/12/25 19/01/26 au 20/01/26 02/02/26 au 03/02/26 16/02/26 au 17/02/26 |
Centre de Formation Marseille Bouches-du-Rhône | 17/11/25 au 18/11/25 15/12/25 au 16/12/25 19/01/26 au 20/01/26 16/02/26 au 17/02/26 16/03/26 au 17/03/26 |
Formation dans vos locaux - France entière (intra-entreprise) | Nous contacter pour une proposition de dates |
Formation Blended Learning (formation théorique en E-learning + formation pratique en présentiel) | Nous contacter pour une proposition de dates |
Price of the BS BE Manoeuvre Training
Voltwork is Qualiopi certified. Whether you are an employee, self-employed, or an individual, we can offer you financing solutions via your OPCO, your Fonds d’Assurance Formation, or France Travail.
| TRAINING | INTER-COMPANY RATE (at our center) | IN-COMPANY RATE (at your premises) |
|---|---|---|
| BS BE Manoeuvre Training – Initial | €350 excl. VAT / trainee | €1,600 excl. VAT / group |
| BS BE Manoeuvre Training – Refresher | €300 excl. VAT / trainee | €1,200 excl. VAT / group |
(*) You can include up to 12 trainees in an in-company session.
Training Program
Theoretical Training for BS BE Manoeuvre Electrical Certification
- Understand standard NFC18-510 and regulations
- Review of electricity basics: direct current / alternating current, electrical quantities (voltage, resistance, current, power), voltage domains (Very Low Voltage, Low Voltage, High Voltage A & B)
- Understand electrical hazards and their effects on the human body (electric shock, electrocution, burns, falls…) and equipment (fires)
- General principles of prevention and protection and risk assessment
- The role of interveners, documentary procedures, and access rules for electrical installations
- Environmental zones and safety distances to be observed in Low Voltage
- The limits of the BS BE Manoeuvre electrical certification
- Identify equipment and understand their functions on an electrical installation
- Procedure to follow in case of an accident or fire of electrical origin
- Theoretical assessment: BS BE Manoeuvre electrical certification MCQ
Practical Training for BS BE Manoeuvre Electrical Certification
- Identify risks, environmental zones, and safety distances before performing an elementary intervention
- Presentation of electrical equipment: HV / LV installation, cabinets, enclosures, conduits
- Verification and use of Personal Protective Equipment
- Perform de-energization on an IP2X electrical panel (identification, lockout, Absence of Voltage Verification)
- Perform a replacement and connection operation
- Perform a maneuver in a reinforced Low Voltage proximity zone (zone 4, less than 30 cm from an exposed live part)
- Practical assessment by the trainer
Fill out the form or call us at 01.87.66.30.70
They train their teams with VoltWork
BS BE Manoeuvre Training FAQ
What is the Benefit of Obtaining BE Manoeuvre Certification in Addition to BS Certification?
The BS electrical certification does not allow operations in the reinforced proximity (zone 4) of a live part. This constraint can be limiting if you need to de-energize a non-IP2X electrical panel. The BE Manoeuvre certification allows you to cover this scenario, authorizing you to de-energize in zone 4, while being equipped with the appropriate PPE.
What are the Limits of the BS Electrical Certification?
The BS electrical certification allows you to perform elementary interventions on terminal circuits with a cross-section of 6 mm² or less in copper, equipped with a disconnector, with a voltage of 400 V AC or less, and protected by a short-circuit protection device of 32 A maximum in AC (with a 30 mA differential). The certified BS individual works alone; they cannot supervise a team.
I Need to Perform Interventions outside the Limits of BS, What Certification should I Consider?
Electrical certifications for electrician personnel will need to be considered. Depending on the interventions to be performed, this could involve a BR and/or B1(V) B2(V) and/or BC electrical certification. These certifications require a good understanding of electricity.
What is the Validity Period of the BS BE Manoeuvre Electrical Certification?
In accordance with the requirements of standard NFC 18-510, the validity period of the certification is 3 years. A refresher training must be completed before this deadline. The duration of the BS BE Manoeuvre refresher is 11 hours.
What Equipment is Necessary to Conduct the BS BE Manoeuvre Training On-Site?
To train your teams at your premises, a room capable of accommodating trainees and the trainer will be required. Our trainers have mobile technical platforms (electrical panels…) and the PPE necessary for conducting the training. If you wish, practical training can be conducted directly on your installations.
What PPE is Necessary for a BS BE Manoeuvre Certified Individual?
A BS BE Manoeuvre certified individual must at minimum have Class 0 insulating gloves (standard NF EN 60903), a face shield, a voltage absence tester, and a lockout device adapted to the disconnecting equipment of your electrical panel. This PPE must be supplemented with insulated tools suitable for the interventions to be performed.
Our Training Center for BS BE Certification
Our Resources
We provide you with a team of 60 certified trainers, experts in electrical safety.
To support you through all stages of your training, our Training support team is ultra-responsive. Whether before, during, or after your training, we are here to help you with administrative, financing, or pedagogical aspects.
In-person or E-Learning: the Choice is Yours
We offer different training modalities to meet your specific needs. You can opt for 100% in-person inter-company training, customized training at your premises, or Web or Mobile E-learning training for maximum flexibility.
The Reference in Electrical Safety
The satisfaction of our trainees is our priority, which is why we are proud to be the reference in Electrical Safety. Each month, more than 300 trainees are trained in electrical certifications with us.
As a Qualiopi certified training organization, all our training courses can be covered by your OPCOs.
Complementary Electrical Certification Training
Our Electrical Certification Trainers
Some examples of trainers who work on the BS BE Manoeuvre certification!
Élodie
Trainer
Elodie spent 6 years as a professional risk prevention advisor and in-house trainer for a community of municipalities with 550 agents. Since 2017, she has been working full-time as a trainer for electrical certifications, SST, and PRAP. Elodie designs and leads innovative and interactive training sessions, drawing on her technical expertise and pedagogical skills.
Stéphane
Trainer
Stéphane spent 8 years in industry as a Methods & Maintenance Technician and Health and Safety at Work Referent. He has a perfect command of industrial risks and has been working since 2019 as a trainer in electrical certifications (H0B0, BS BE, B1 B2 BR BC) and SST, whether for inter-company training or directly at our clients’ premises.
Mohamed
Trainer
Mohamed worked for 7 years at a major Facility Management player, first as a team leader and then as a regional QSE Manager. He has been working as a safety trainer for 5 years. In this capacity, he conducts electrical certification training for non-electricians for our clients in the Tertiary sector.
