Electrical Authorization Training BR
Get trained in electrical authorization for electricians BR. This training is available at one of our centers or at your premises.
or contact us at
(4.9/5) on Google
300
TRAINEES TRAINED / MONTH
4.9 / 5
SATISFACTION RATE
98%
SUCCESS RATE
The BR electrical authorization training is intended for General Intervention Officers: all professional electricians who are required to carry out fault detection, troubleshooting/maintenance, restoration to working order, partial and temporary commissioning on Low Voltage electrical installations.
At the end of the BR authorization training, the trainee will be able to perform electrical interventions by applying the safety prescriptions of standard NFC 18-510, including:
- Analyze risks and intervene near live bare parts
- Supervise an electrical worker during the intervention
- Lock out an electrical installation for their own account and for their worker
- Connect and disconnect conductors in the presence of voltage
- Perform tests, measurements, and verifications as part of the intervention
Objectives of the BR Electrical Authorization Training
- Ensure the direction and carry out fault detection, troubleshooting, replacement of electrical equipment, and connection interventions with voltage presence in LV and VLV, while respecting the prevention measures of standard NFC 18-510.
- Enable the employer to issue a BR electrical authorization certificate
3 days
INITIAL TRAINING DURATION
1.5 days
REFRESHER TRAINING DURATION
Audience & Prerequisites
- Examples of concerned professionals: industrial maintenance manager/technician, technical manager, general services electrician, electric vehicle charging station installer (IRVE), HVAC technician
- The BR electrical authorization training requires electrical skills resulting from a diploma, training, or appropriate professional experience.
How to Train?
- At our training centers (inter-company): we welcome your teams for BR training at our electrical authorization training center in Paris and our center in Marseille.
- At your sites (intra-company): our network of 60 trainers allows us to intervene at your premises throughout France to train your technical teams in BR.
- In Blended Learning format: a training that combines an E-Learning part and a one-day (7 hours) practical face-to-face training. A flexible format to avoid demobilizing your teams.
Our Training Dates
All our training dates are 100% guaranteed. We do not cancel any session.
LIEU DE FORMATION | PROCHAINES DATES |
Centre de Formation Paris Île-de-France | 17/11/25 au 19/11/25 24/11/25 au 26/11/25 01/12/25 au 03/12/25 15/12/25 au 17/12/25 12/01/26 au 14/01/26 26/01/26 au 28/01/26 09/02/26 au 11/02/26 18/02/26 au 20/02/26 23/02/26 au 25/02/26 |
Centre de Formation Marseille Bouches-du-Rhône | 17/12/25 au 19/12/25 14/01/26 au 16/01/26 11/02/26 au 13/02/26 11/03/26 au 13/03/26 |
Formation dans vos locaux - France entière (intra-entreprise) | Nous contacter pour une proposition de dates |
Formation Blended Learning (formation théorique en E-learning + formation pratique en présentiel) | Nous contacter pour une proposition de dates |
BR Authorization Training Price
Voltwork is Qualiopi certified. Whether you are an employee, self-employed, or an individual, we can offer you financing solutions via your OPCO, your Training Insurance Fund, or France Travail.
FORMATIONS | DANS NOTRE CENTRE (tarif par personne) | DANS VOS LOCAUX* (tarif par groupe) |
Formation Initiale 3 jours | 500€ HT | 2000€ HT |
Formation Recyclage 2 jours | 350€ HT | 1200€ HT |
(*) You can include up to 12 trainees in an intra-company session.
Training Program
BR Electrical Authorization Theoretical Training
- Understand standard NFC18-510 and regulations
- Effects of electricity on the human body (electrocution, electric shock, burns,…)
- Names and limits of voltage domains, equipment related to works or installations
- Environmental zones and their limits
- Risk assessment and implementation of general protection principles
- Ensure electrical supervision of operations
- Collective protective equipment (barrier, screen, banner…), Personal protective equipment and limits of use
- Different appropriate materials and tools and risks related to their handling (hand tools, ladder,…)
- Conduct to be adopted in case of electrical accident
- Know the limits of BR authorization
- The function of electrical equipment: cutting, protection, separation, control
- Theoretical evaluation: BR electrical authorization MCQ
BR Electrical Authorization Practical Training
- Identify risks, environmental zones, and safety distances before performing an elementary intervention
- Use applicable documents during an intervention: safety instructions, work authorization
- Apply prevention measures during a general low voltage intervention: neutralize the risk, organize, delimit, signal, respect, ensure respect
- Perform a lockout for one’s own account
- Perform a connection/disconnection in the presence of voltage
- Perform a covering or dressing
- Practical evaluation: practical scenario adapted to the BR level proposed by the trainer
Fill out the form or call us at 01.87.66.30.70
They train their teams with VoltWork
FAQ BR Electrical Authorization Training
What are the Limits of BR Electrical Authorization?
The BR authorized general intervention officer can work alone or can have under their orders one (and only one!) B1 B1V authorized electrical worker. They can, for their own account and, if applicable, for their worker, carry out lockout operations without being BC authorized. Interventions are carried out de-energized, however, when it is not possible to connect, wire or disconnect de-energized, they can be performed in the presence of voltage on an open circuit within the limits defined by the standard: circuits protected by a rated current protection device ≤ 63A in alternating current and ≤ 32A in direct current, supply voltage ≤ 500 V in alternating current and ≤ 750V in direct current, copper cables with a cross-section less than or equal to 10 mm² (16mm² in aluminum).
I Need to Perform Interventions outside the BR Limits, What Authorization(S) should I Consider?
You will need to consider supplementing your BR authorization with B2 B2V and BC authorizations. B2V authorization – Work Supervisor will allow you to supervise electrical work by overseeing a team of more than one person. BC electrical authorization – Lockout Supervisor will allow you to lock out installations upstream of your team’s intervention. In case of intervention on a Low Voltage panel located in a room with High Voltage installations (HTA cells and transformer for example), the BR authorized person must have an H0 or H0V authorization (for reinforced proximity).
What Personal Protective Equipment (PPE) is Recommended for BR Authorization?
For the general intervention officer, we recommend the PPE detailed below. However, it should be noted that it is not possible to define an exhaustive list without a precise vision of the types of installations and operations performed: insulated tools, insulating mat, insulating gloves, face shield, insulating sheet and clamps, voltage absence tester, jumper and corresponding lockout padlock, MALT/CC device, marking.
Does BR Electrical Authorization Allow Me to Work on Photovoltaic Installations?
Partially. Photovoltaic installations (direct current) present specific risks that require “installers to be well aware of them. You will therefore need to complete your BR training with the PV module to be” authorized BR PV – Photovoltaic Application Scope. This additional training takes place over one day of 7 hours.
Train for BR Authorization with Voltwork
Our Means
60 certified trainers, experts in electrical safety
An ultra-responsive team to support you before, during, and after your training courses at the administrative, financing, or pedagogical level
BR Authorization: our Training Formats
Choose the BR training format that best suits your teams:
100% in-person at one of our centers (inter-company training)
At your premises, for tailor-made training on your installations (intra-company training)
In Web or Mobile E-learning to smooth the training load
The Reference in Electrical Safety
300+ trainees trained / month in electrical authorizations
Qualiopi certified training organization: all our training courses can be covered by your OPCO
All our Electrical Authorization Training Courses
BR Electrical Authorization – our Trainers
All our trainers who intervene on BR electrical authorization training have been selected based on their dual competence: electrical safety expertise + operational sectoral experience.
Jonathan
Trainer
Jonathan spent 6 years at a French car manufacturer as an electrician on the installation, maintenance, and troubleshooting of production lines. He has been working for 4 years as a consultant and trainer on electrical risk prevention.
Jean-Marc
Trainer
Jean-Marc spent 5 years as a Safety Prevention Officer at one of the French leaders in construction. He now works as a trainer for electrical authorizations and the AIPR exam since 2017. He conducts training for electricians and non-electricians with our clients in the construction, energy, and telecom deployment sectors.
Stéphane
Trainer
StĂ©phane spent 8 years in the industry, as a Methods & Maintenance technician and Health and Safety at Work Referent. He perfectly masters the risks in the industrial environment and has been working since 2019 as a trainer in electrical authorizations (H0B0, BS BE, B1 B2 BR BC) and SST, whether for inter-company training or directly at our clients’ premises.
